● Operating voltage: 12V 1A power supply current requirements within the above 2A, On board 400mA DC-DC Boost regulator to provide power supply to LCD backlight.
● Support 864 x 480 x 24bit graphics content through SSD1963 controller .It also equips parallel MCU interfaces in different bus width to receive graphics data and command from MCU. Its display interface supports common RAM-less LCD driver of color depth up to 24 bit-perpixel. Warning: All data port voltage can not exceed 3.6V.
● Supports BB Black, comes with related images like:Angstrom. and also Supports Banana Pi/Banana Pro,comes with related images like:Lubuntu, Raspbian.We provided CD disk with related driver and souce code to you, If you are unsure about any of the technical issues.please contact us Freely.
● LCD Size : 7.0inch (Diagonal)
● Resolution: 1024*600(have been upgraded)
● Driver Element : A-Si TFT active matrix
● Display mode : Normally White ,Transmissive
● High Resolution: 1152,000 Dots (800 x 3(RGB) x 480)
● SSD1963 touch panel controller
● Dot pitch : 0.0642(W) X 0.1790(H)mm
● Active Area : 154.08(w)X 85.92(H)
● Module Size : 164.9(w)X100.0(H)x5.7(D)mm
● Surface Treatment : Anti-glare
● Color arrangement : RGB-Stripe
● Interface: Digital
● Blacklight : Highlighted LED lamp backlighting
● TFT Power(pin Name: 3.3V): The power of the screen is 2.8-3.3V; not use 5V, all the Pin's voltage on the module
● Can not be more than 3.3V.
● Backlight power supply (pin Name: 5V): backlight power range is 4.5-7V.
● Interface Type: 16 parallel
● Operating Temperature : -20 ~ +70 degrees centigrade
● Storage Temperature : -30 ~ +80 degrees centigrade
● 7inch HDMI IPS (B) x 1
● HDMI cable x 1
● USB type A plug to micro B plug cable x 1
● RPi screws pack (4pcs) x 1
● DVD × 1
1.Please note Supported update Raspberry Pi 4 3 2 and RPi 1 Model B B+ BB BLACK supported
2.Power Supply is NOT included.for PI ,do not require power supply
3.There is a sticker on the LCD screen. Please peel off before use.
SC7B 7 inch HDMI LCD(B) Using standard HID protocol, so that you can migrate its to your own systems
With the use of Pi Raspberry, support Raspbian、Ubuntu、Windows 10 IoT Single-Touch, Free drive.
When used as a computer monitor, support 10 / 8.1 / 8 / 7, Five point touch, Free drive
We received some orders from all over the world about the screen to make breathing devices due to the outbreak of Covid-19.
We understand the urgent needs on geting the parts quickly to make breathing devices. We are now working hard to produce the screens, if you have any question, welcome to send us emails.